A Simple Computer Repair Dead hard drive? Do you need more storage space for your computer? Well, you're going to need to replace your hard drive. replica ulysse nardin maxi marine You might think that changing a hard drive is a hard task, one that you can't do on your own. In reality all you need is a screwdriver and an OS disk. The Process The first thing you will want to do, if you can, is to save any information from your old hard drive that you want to hold on to. You can transfer it to an external drive, put it on a usb, or burn it to a cd or dvd. Of course , if your hard drive is dead this will not be possible, but if you call a computer repair specialist there is a possibility that they will be cheap armand nicolet tramelan watches able to save information from your hard drive. Once you have finished transfering your data you will need to turn off your computer and remove the power cord. Once you do this it is time to remove the case from your computer and locate the hard drive. Once you have found the hard drive begin removing any screws that hold the drive fake rolex datejust royal black in place. Make sure to discharge any static electricity you may have built up before reaching inside your computer. A static shock may cause damage to your computer. Before you try to remove the hard drive you will need to unplug the cables connecting it to your motherboard. Some desktop computers have drive bays that are 5-1/4 inches wide. However, most hard drives today are only 3-1/2 inches wide. If you have 5-1/4 inch drive bays, be sure that the new hard drive you fake a lange sohne datograph watch buy comes with a 5-1/4 inch carrier - a metal frame into which the 3-1/2 inch drive can be secured. If your current hard drive is 3-1/2 inches wide you may be able to reuse the carrier. After you have secured your hard drive into the carrier, plug the cables into your new hard drive. Replacement cables should come with the new drive if your cables do not fit. You simply have to remove the old cables from the motherboard and connect the new ones. After you have connected the cables return the hard drive to it's place inside your computer. Then secure the drive with all of the screws you had previously removed. You can then replace the cover and plug your computer back in. fake hamilton railway special watches fake panerai radiomir 8th second All you need to do now is power up your system, install your Operating System, and transfer any data that you backed up from your previous hard drive. There you go, you have a new hard drive. A simple process that you can complete by yourself. But there are always computer repair specialists who will take care of it for you.